Introduction
DIAMOND-CUT is an innovative manufacturing process resulting in a visibly higher sprocket quality than was ever possible on standard milled sprockets. Special tooling guarantees a super accurate cutting surface. At the same time the material is highly condensed in the area of the teeth flanges, so that in many cases additional heat treatment is no longer necessary. All sprockets are made from the best German steel to obtain a continued high quality product.
25% higher degrees of hardness in the teeth flanges
50% better surface smoothness and therefore particularly quiet
Front Sprockets with tolerance of overall diameter and wobble of below 0.2mm
Rear Sprockets with tolerance of overall diameter and wobble of below 0.2mm
FRONT SPROCKETS
?ESJOT front sprockets were specially developed for the high OEM requirements and are one of the best sprockets on the market worldwide. A special steel, a high-quality case hardening as well as a precise teeth provide an extraordinarily high strength and durability - optimally suitable for the wear-intensive conditions in all areas.
High-strength steel.
Prepared on CNC machines.
Modern broaching machines guarantee an exact fit on the drive shaft.
Parts are hardened after machining.
Plane and concentricity accuracy less than 0.1mm.
100% Made in Germany.
OEM Quality.
FRONT SPROCKET SPORT (S)
Weight optimisation through lightening bores and additional grooves.
Specially optimized for the racing sector.
No negative effects on mileage despite maximum weight reduction.
High-strength steel.
Prepared on CNC machines.
Modern broaching machines guarantee an exact fit on the drive shaft.
Parts are hardened after machining.
Plane and concentricity accuracy less than 0.1mm.
100% Made in Germany.
OEM Quality.
25% higher degrees of hardness in the teeth flanges
50% better surface smoothness and therefore particularly quiet
Front Sprockets with tolerance of overall diameter and wobble of below 0.2mm
Rear Sprockets with tolerance of overall diameter and wobble of below 0.2mm
FRONT SPROCKETS
?ESJOT front sprockets were specially developed for the high OEM requirements and are one of the best sprockets on the market worldwide. A special steel, a high-quality case hardening as well as a precise teeth provide an extraordinarily high strength and durability - optimally suitable for the wear-intensive conditions in all areas.
High-strength steel.
Prepared on CNC machines.
Modern broaching machines guarantee an exact fit on the drive shaft.
Parts are hardened after machining.
Plane and concentricity accuracy less than 0.1mm.
100% Made in Germany.
OEM Quality.
FRONT SPROCKET SPORT (S)
Weight optimisation through lightening bores and additional grooves.
Specially optimized for the racing sector.
No negative effects on mileage despite maximum weight reduction.
High-strength steel.
Prepared on CNC machines.
Modern broaching machines guarantee an exact fit on the drive shaft.
Parts are hardened after machining.
Plane and concentricity accuracy less than 0.1mm.
100% Made in Germany.
OEM Quality.
Contact Info
Address:
Unit 20, 18 Hinkler Court, BRENDALE QLD 4500 AUSTRALIA
Brisbnae
Qeensland 4500
Australia
Brisbnae
Qeensland 4500
Australia
Tel:
07 3881 0809
Fax:
07 3881 0809
Website:
https://www.metalgear.com.au/
Hours of operation
| From | To | From | To | From | To | ||
|---|---|---|---|---|---|---|---|
| Monday | Open | ||||||
| Tuesday | Open | ||||||
| Wednesday | Open | ||||||
| Thursday | Open | ||||||
| Friday | Open | ||||||
| Saturday | Open | ||||||
| Sunday | Open | ||||||
