Latest Photos
Introduction
No corrosion, no movement, no water ingress using the LEAK KING® roof fixing system....
By providing support to the roof sheets and adding rigidity to the overall roof structure, the LEAK KING® system prevents the indentations and loosening of fasteners which lead to leakage.
Funnels caused by punching and hammering, vibration, denting caused by loads, rotting of purlins, all of these are effectively prevented. There is no metal contact between the screw and the sheeting – a polypro cone acts as an isolator and absorbs contraction and expansion.
The LEAK KING® screw has a special galvanised sleeve that expands as the fastener is screwed in, providing rigid support for the roof sheet and also preventing the fastener from being screwed in too far. The complete screw with sleeve is inserted from above. This prevents indentations which funnel water on to the purlins. LEAK KING® screws are suitable for IBR and conventional roof sheets, on either metal or timber purlins.
The LEAK KING® screw is an ISO Category 4 compliant screw. From the galvanised washer and sleeve to the polypro cone, the hot dipped galvanised screw and the poly-isobutyl rubber seal that never becomes brittle or cracks, the LEAK KING® system is corrosion-resistant throughout.
The poly-isobutyl rubber seal remains permanently flexible and vulcanises onto the roof sheet and the screw, effectively preventing any leakage. Wood purlins do not get wet and rot, making replacement unnecessary. If correctly installed with butyl sealant and side stitching every 500mm, the roof will be waterproof even in hailstorms, when water dams up.
LEAK KING® roof fasteners are being used on various major projects in and around South Africa due to its unique characteristics which make it stand out way above other conventional roof fastening systems. The system is suitable to new and existing roofs. LEAK KING® is a South African patent and is specified by architects and insisted on by many contractors because they simply do not get any comebacks. So for watertight peace of mind insist on LEAK KING® roof fasteners.
By providing support to the roof sheets and adding rigidity to the overall roof structure, the LEAK KING® system prevents the indentations and loosening of fasteners which lead to leakage.
Funnels caused by punching and hammering, vibration, denting caused by loads, rotting of purlins, all of these are effectively prevented. There is no metal contact between the screw and the sheeting – a polypro cone acts as an isolator and absorbs contraction and expansion.
The LEAK KING® screw has a special galvanised sleeve that expands as the fastener is screwed in, providing rigid support for the roof sheet and also preventing the fastener from being screwed in too far. The complete screw with sleeve is inserted from above. This prevents indentations which funnel water on to the purlins. LEAK KING® screws are suitable for IBR and conventional roof sheets, on either metal or timber purlins.
The LEAK KING® screw is an ISO Category 4 compliant screw. From the galvanised washer and sleeve to the polypro cone, the hot dipped galvanised screw and the poly-isobutyl rubber seal that never becomes brittle or cracks, the LEAK KING® system is corrosion-resistant throughout.
The poly-isobutyl rubber seal remains permanently flexible and vulcanises onto the roof sheet and the screw, effectively preventing any leakage. Wood purlins do not get wet and rot, making replacement unnecessary. If correctly installed with butyl sealant and side stitching every 500mm, the roof will be waterproof even in hailstorms, when water dams up.
LEAK KING® roof fasteners are being used on various major projects in and around South Africa due to its unique characteristics which make it stand out way above other conventional roof fastening systems. The system is suitable to new and existing roofs. LEAK KING® is a South African patent and is specified by architects and insisted on by many contractors because they simply do not get any comebacks. So for watertight peace of mind insist on LEAK KING® roof fasteners.
Contact Info
Address:
703 oktaan straat
limpopo
modimolle 0510
South Africa
limpopo
modimolle 0510
South Africa
Tel:
+27 14 717 2122
Fax:
086 658 5182
Website:
http://www.leakking.co.za
Offering
- Roof fateners
Hours of operation
| From | To | From | To | From | To | ||
|---|---|---|---|---|---|---|---|
| Monday | Open | ||||||
| Tuesday | Open | ||||||
| Wednesday | Open | ||||||
| Thursday | Open | ||||||
| Friday | Open | ||||||
| Saturday | Open | ||||||
| Sunday | Open | ||||||
